Using waste pyrolysis plant to deal with the waste tires is an environmental- friendly way. In addition, the users also can make profits from the plant. Comparing with the investment, its economic efficiency is more obvious. However, when you are planning to buy the plant, the tyre pyrolysis plant cost is the most concerned issue.
Generally, the most important factors that affect its cost are the models and pyrolysis systems. Here are the main parameters of Beston tire pyrolysis plants.
| Model | BLJ-6 | BLJ-10 | BLJ-16 | BLL-20 |
| Daily Capacity | 6T | 8-10T | 15-20T | 20-24T |
| Working Method | Batch | Semi-Continuous | Fully Continuous | |
| Raw Materials | Waste Plastic, Tyre, Rubber, Oil Sludge | |||
| Reactor Size | D2.2*L6.0m | D2.6*L6.6m | D2.8*L7.1m | D1.4*L11m |
| Pattern | Horizontal & Rotary | |||
| Heating Materials | Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc. | |||
| Total Power | 24kw/h | 30kw/h | 54kw/h | 71.4kw/h |
| Floor Area (L*W*H) | 30*10*8m | 30*10*8m | 40*10*8m | 45*25*10m |
| Operating Pressure | Normal Pressure | Constant Pressure | ||
| Cooling Method | Water Cooling | |||
| Service Life | 5-8 Years | |||
Differences Between Batch and Fully Continuous Plant
Firstly, pre-treatment.
Continuous waste tire pyrolysis plant needs pre-treatment devices. Before putting tires into its reactor, it needs a tire shredder to cut the tires into small pieces (30-50mm).
But the batch plant doesn’t need pre-treatment devices and the tires can be put into the reactor directly.
Secondly, feeding and discharging.
For fully continuous pyrolysis plant, the tires can be transported to the reactor by an auto feeder. Besides, its discharging of carbon black is also automatic.
While for the batch pyrolysis plant, the feeding process and the discharging of steel wire are both manual. So it is suitable for the area where the labor cost is low.
Moreover, the fully continuous pyrolysis plant is efficient in operating, so the investors do not invest too much in the labor cost.
Thirdly, working shift.
Continuous pyrolysis plant can work 3-4 shifts per day, and its reactor just needs 1 hour to cool down before starting another batch.
However, the batch pyrolysis plant works 1 shift per day and its reactor needs 3-4 hours to cool down before starting another batch.
Benefit the Plant Can Bring
The cost of waste tyre pyrolysis plant will also be affected by the profits it can bring you.
The tyre pyrolysis oil, pyrolysis carbon black, and steel wire are popular goods in the market. If you refine those end products, the price of those end products is much higher. Even the combustible gas produced in the pyrolysis process can be heating materials. In this way, the energy cost is saved.
Since the plant can make huge profits for you, and our plants have a longer life span than common machines, so investing in Beston products is wise for you. Contact us and get your inquiry now.
